How to play electric skateboard? Beginners can learn electric skating skills in seven steps!
Electric skateboards have become increasingly popular in recent years. Riding an electric skateboard may seem intimidating, but it’s actually very easy to learn. In this beginner’s guide, we’ll show you how to ride and ride an electric skateboard. At first glance, electric skateboards look similar to regular skateboards. The biggest difference is that electric boards have one or more battery-powered motors. You can use the remote to operate the board using various buttons and the throttle to accelerate and brake. Some have LED displays that show important information such as riding mode, speed, battery level, etc.
Because electric skateboards use motors, they are usually much faster than regular skateboards. Today, even many affordable options can travel at speeds in excess of 30KM/H. It’s also easier to go uphill and make short trips with an electric skateboard. The last major difference is because the electronics add weight to an electric skateboard, making most tricks more challenging.
Steps and techniques for riding an electric skateboard
Now that you know what an electric skateboard is, do you know how to ride one? If you have experience riding an ordinary skateboard, riding an electric skateboard is a big advantage. There’s not much difference between riding an electric skateboard and one propelled by your feet, but due to the speed and remote control, it may take some practice to get used to the difference in power. If you’re new to skateboarding, it can be more challenging to learn.
Step one: Wear complete protective gear
First and foremost, be sure to wear safety gear before stepping onto an electric skateboard, including a helmet, wrist guards, elbow and knee pads and even shoulder pads. Extremity injuries are more common in skateboarding because most people use their hands to support themselves when they fall. Head injuries are more serious, so be sure to wear a helmet that fits well, but not so tight that you injure yourself.
If you have already learned how to skateboard normally but don’t have much of the above-mentioned equipment, it is strongly recommended that you equip yourself with these equipment before learning electric skateboarding to ensure safety. Since electric skateboards are very fast for beginners, they are more dangerous than ordinary skateboards. Also, pay attention to what you wear. It is best to wear skate shoes. If not, it is recommended to wear sports shoes that can cover your feet. Do not wear open-toed sandals, high heels, etc. You can wear shorts, jeans, etc., but do not wear overly loose pants, skirts, or clothes with too many accessories to prevent fabric from getting stuck in the wheels and causing injuries such as falling during an emergency stop.
Step 2: Check the bridge and other accessories before traveling
Bridges are two metal pieces that attach to the bottom of your skateboard, one on the front and one on the back. Even if you are a beginner, you should make sure that the two bridges are not damaged or loose. This will help you maintain your balance better and reduce the occurrence of jitter when accelerating. Of course, as your skill level improves, you can gradually loosen them to increase flexibility and turns.
In addition, you also need to familiarize yourself with the remote control before getting on the board. Electric skateboards have different modes available such as “forward”, “reverse” and speed settings such as slow, medium and fast. It is recommended that beginners start with the slowest mode and then increase the speed after you are familiar with and accustomed to this speed.
Step 3: Determine the stance that suits you
Friends who have skateboarded before are more familiar with this and have their own accustomed postures. Like ordinary skateboards, there are two main postures used when riding an electric skateboard: Regular and Goofy. The skateboarding stance with the left foot in front is called Regular; the stance with the right foot in front is called Goofy. Since most people are right-handed, it’s common to have the left foot in front. Of course, this does not mean that for right-handers, the Regular stance is the most natural and best. At this point, we usually do not say “correct posture”, but “the posture that suits you”, so beginners You can try more and find the position that makes you feel the most comfortable and stable, which is the position that suits you best.
Regular: left foot in front, right foot in back
Goofy: right foot in front, left foot in back
Determining your posture is only the first step after getting on the board. If you want to ride on the electric skateboard, you must also master the balancing skills. If your body is too stiff or upright, don’t think you will fall if you accelerate. You can stretch out your arms like walking on a balance beam to maintain balance, but don’t act motionless like you’re tied to a pole. When you start riding slowly, slowly turn your body, bend your knees, and explore various ways to maintain your balance. posture.
Most electric skateboards have longer decks. Standing slightly wider with your feet can also help control balance and make it easier to move your body’s center of gravity forward and backward when accelerating and decelerating.
Step 4: Start riding
If you are afraid that you will be thrown away if you press the switch directly, it is recommended that you start the skateboard with your pedals, just like riding an ordinary skateboard, to increase your sense of balance and enhance your self-confidence. Of course, not everyone has to start this way.
When ready, slowly turn the switch to start the motor (remember to turn on the lowest speed). Remember to relax your body, bend your knees for better balance, and extend your arms before the initial acceleration. If your posture feels strange or awkward while riding, you can stop and change your position first.
Step Five: Learn How to Turn
Skateboard enthusiasts definitely know how to turn their skateboards, but if you are a complete beginner, learn how to do it now! Turning methods are divided into heel turning and toe turning. If your stance is Regular, you can turn right by applying force on your toes, and you can turn left by applying force by your heels; and if you are in Goofy stance, the turning situation is opposite to that of Regular stance. Do you think it’s too simple? In fact, there are many places that need attention.
When turning with your heels, bend your knees slightly, place your weight on the heel of your front foot, and thrust your hips slightly to maintain balance as you move your weight.
Use your toes to turn. Bend your knees and shift your weight forward a little, trying to rest your weight on the toes of your front foot. Don’t be afraid that you will fall forward. Don’t lean back at this time, otherwise you will fall directly, and the skateboard will fly out due to your thrust. If you don’t brake in time, you will injure passers-by.
Step 6: Learn to brake
In terms of braking, electric skateboards are different from other means of transportation. Sudden braking on electric skateboards is more likely to cause the rider to fall and get injured, which is more serious than other electric vehicles. Therefore, it is recommended that you do not brake or stop suddenly. So, how to brake (electric skateboard) correctly? First of all, since the center of gravity of the body will automatically tilt forward when braking, you should lean back slightly when braking, and at the same time, slightly bend your knees to ensure that the front foot is stable, and then use the remote control to gradually reduce the speed.
Step Seven: Use Correct Falling Position
Falling down on an electric skateboard is inevitable. As your technique improves, the number of falls will decrease, but if you master the correct fall posture, you will be injured less frequently and less severely. If you fall forward, you will need to lower your head and extend your arms above your shoulders. This rolling fall helps protect your arms from injury. If you fall backward, tighten your chin and lift your legs, curling up as much as possible to avoid injuring the back of your head and limbs. When falling to the left or right side, keep your arms as close to your body as possible to avoid arm fractures. Using the correct fall method can disperse the impact and avoid serious injuries. You can also practice rolling, falling and other postures on the grass to build muscle memory.
Electric skateboards offer the thrill of traditional skateboarding with the added power of a motor. You can ride farther and faster than a regular skateboard, making it the best choice for short commutes and fun rides. If you are going from a regular skateboard to an electric skateboard, the transition is not difficult and we hope this article helps you. For the complete skateboard layman, we not only want to teach you how to ride an electric skateboard, but also want you to understand the electric skateboard faster and enjoy the fun of electric skateboarding. Finally, regardless of experience level, always wear safety gear and be aware of your surroundings.
