Regular cleaning of electric skateboards is crucial for maintaining their performance, safety, and longevity. Dirt, dust, and debris can accumulate on various components of the skateboard, including the deck, wheels, bearings, and electronics, which can negatively impact performance and increase the risk of malfunctions or accidents. Cleaning removes these contaminants, ensuring smooth operation, optimal traction, and reliable control. Additionally, proper maintenance helps prevent corrosion, rust, and other forms of damage to sensitive electronic components, prolonging the lifespan of the skateboard. Furthermore, a clean electric skateboard not only performs better but also looks better, enhancing the rider’s satisfaction and enjoyment of the riding experience. Therefore, incorporating regular cleaning and maintenance into the skateboard care routine is essential for ensuring a safe, smooth, and enjoyable ride every time.
To clean your off road electric skateboard, you need to switch off the skateboard and keep it unplugged. The components of an electric skateboard that need cleaning the most are grip tape and bearings.
- Gather Supplies:
- Soft-bristled brush or toothbrush
- Microfiber cloth or soft towel
- Mild soap or skateboard-specific cleaner
- Water (avoid excessive water exposure to sensitive components)
- Q-tips or cotton swabs
- Isopropyl alcohol (optional)
- Silicone lubricant (for bearings, if necessary)
- Power Off and Disconnect Battery:
- Before cleaning, ensure the skateboard is powered off and disconnected from the battery to prevent accidental activation and ensure safety.
- Remove Debris:
- Use a soft-bristled brush or toothbrush to gently remove dirt, mud, and debris from the skateboard’s deck, trucks, wheels, and motor. Pay special attention to crevices and hard-to-reach areas where dirt can accumulate.
- Clean the Deck and Trucks:
- Dampen a microfiber cloth or soft towel with water and mild soap. Gently wipe down the skateboard deck and trucks to remove dirt and stains. Avoid using excessive water, especially on wooden decks, as it can cause warping or damage.
- Clean the Wheels and Bearings:
- Use a damp cloth or brush to clean the wheels and bearings of the off-road electric skateboard. Remove any mud or debris stuck in the treads and around the bearings. If necessary, use isopropyl alcohol to clean the bearings thoroughly.
- Inspect Electronic Components:
- Carefully inspect the motor, ESC (Electronic Speed Controller), battery, and wiring harnesses for any signs of damage or corrosion. Use a soft brush or compressed air to remove dirt and dust from electronic components.
- Dry Thoroughly:
- After cleaning, allow the off-road electric skateboard to air dry completely before reassembly and storage. Ensure all components are dry to prevent water damage.
- Lubricate Bearings (if necessary):
- Apply a small amount of silicone lubricant to the bearings to ensure smooth rotation and prevent rust or corrosion.
- Reassemble and Store:
- Once dry, reassemble the components of the off-road electric skateboard and ensure everything is securely in place. Store the skateboard in a cool, dry place away from direct sunlight and moisture to prevent damage.
How To Clean the Grip Tape?
Dirty grip tape will be the most obvious part of an electric skateboard. Keeping the grip tape of your skateboard clean is important, as it can lessen the resistance between your feet and the deck, making it harder to do tricks and raising the risk of falling over. How to properly clean the grip tape of your electric skateboard?
The most convenient way to clean the grip tape is to use a soft toothbrush the remove the dirt stuck on the tape. Soak the toothbrush with soapy water and use it to brush the grip tape. Be careful that the skateboard should not rinse with water, alcohol, or corrosive liquid to prevent damage to the electric parts of the motor, which lead to its malfunction. To make cleaning grip tape easier, you can get an electric skateboard eraser that is made specifically to clean this type of dirt. No need for water. You can just rub the eraser over the grip tape to remove any adhesives and residues.
If the grip tape is too dirty or too broken, you can replace it with a new one. This process can be easier with the help of a hairdryer.
How To Clean the Bearings?
Dirty bearings can greatly affect the performance of your electric skateboard, so it’s best to check and clean them regularly, even if they look clean. Very muddy bearings can even let the wheels stop spinning and produce scraping noises, making the skateboard harder to use. How to properly clean the bearings of an electric skateboard?
To clean the bearings, you need to remove them from the wheels with the skate tool first. After the bearings are out, put them in a bowl of cleaning solvent to remove any dirt. Please note that the cleaning solvent should not be too strong, as it may destroy the shield of the bearings. Use a toothbrush to scrub any persistent residues.
A maintenance oil is great for maintaining the bearings to last longer. It will make it harder for dirt to stick in the bearings and make the bearings work smoother to reduce the noise.
Keep a Good Habit
Please remember that only ride the electric skateboard after it is completely dried. Riding an electric skateboard in the rain or on slippery roads can easily hurt the skateboard and make it extra dirty. Keeping a good riding habit can also reduce the frequency needed for cleaning your electric skateboard.
Any questions
-
what should you do If your electric skateboard won’t charge
-
why is my electric skateboard not turning on
