Zipping down the street on your electric skateboard is a thrill like no other. But keeping that thrill ride smooth requires careful maintenance. In this quick guide, you’ll learn pro tips for cleaning, battery care, inspecting components, and storage to keep your e-skateboard running safely for miles. Join us as we reveal the simple routines that will keep your electric skateboard humming like new.
Have You Inspected Your E-Skateboard Lately?
Inspecting Your E-Skateboard Performing regular inspections is a crucial step toward extending the lifespan and performance of your electric skateboard.
Deck and Components Inspection
After every ride, give your e-skateboard a thorough examination. Assess the deck, wheels, bearings, and other components for any visible signs of wear or damage.
Electronics Check
Be attentive to potential issues with electronic components like the motor and battery. Listen for unusual noises, and check for signs of overheating or other malfunctions.
Check Screws and Bolts
In addition to other components, ensure all screws and bolts on your e-skate are firmly tightened. Loose hardware can lead to serious safety issues and mechanical problems.
Pay Attention to Wheel Screws
The fasteners securing the wheels undergo intense forces. Check they are very tight before every ride.
Inspect Drive Belt
Examine the drive belt connecting the motor and wheels for fraying, damage, and proper tension before heading out.
By performing these inspections consistently, you’ll be able to identify and address issues early, prolonging the life and performance of your e-skateboard. Regular checks ensure that potential problems are nipped in the bud so you can enjoy a smooth and safe ride.
Is Your E-Skateboard As Clean As It Could Be?
Gliding down city streets means your e-skate inevitably collects some grime. But don’t let that dirt take the joy out of your ride. Keeping your deck, wheels, and components clean should be a regular maintenance ritual.
Post-Ride Clean-Up
After each session, give your board a refreshing wipe-down. Use a slightly damp microfiber cloth to lift dust, grit, and mud away from the surface. Take care of electronics like the motor and battery to avoid moisture damage.
Safe Cleaning Practices
Be sure to dry thoroughly with a lint-free cloth – lingering dampness invites corrosion over time. Check wheels and bearings during cleaning to spot issues early. And store in a dry room-temperature spot away from humidity.
Proper Storage
Keep your cleaned e-skateboard in a dry, room-temperature environment to protect it from the elements. Avoid humid, hot, or extremely cold conditions. Store the board in a clean, enclosed area like a closet or cabinet to prevent dust buildup when not in use. Check on the storage conditions periodically to ensure no temperature or moisture fluctuations.
By adhering to a consistent cleansing routine, you are proactively preserving the condition and performance of your skateboard over time. Remember, a clean board is a happy board!
How Do You Care for the Battery and Electronic Speed Controller?
Caring for the high-tech battery and electronics will keep your skateboard’s power and performance in peak condition. Follow these essential maintenance measures to ensure that your battery and engine will last for miles.
- Charge After Each Use: Recharging the battery after every ride ensures it never drains fully, which can degrade battery health over time. Optimize longevity by topping up frequently.
- Store Battery in Dry Environments: Exposure to humidity can corrode the battery’s delicate electronics. Keep it in dry conditions and away from moisture to prevent issues.
- Clean Motor Regularly: Giving the motor a regular cleaning keeps it running coolly and efficiently. Built-up dust leads to overheating and shortened motor life.
- Inspect Motor Pre/Post Ride: Check that the motor sounds and feels normal before heading out. Listen for odd noises and look for overheating. Doing post-ride checks helps spot problems early.
- Avoid Overcharging Battery: Don’t leave the battery plugged in for extended periods after it’s fully charged. Overcharging strains the battery cells and reduces overall lifespan.
- Unplug Battery Before ESC Cleaning: The ESC (Electronic Speed Controller) is highly sensitive. Always disconnect the battery before cleaning the ESC to avoid electrical damage.
With diligent battery charging, motor cleaning, and avoiding overcharge damage, your skateboard’s power system will stay in ideal working order. A well-maintained battery and electronics translate to smiles per mile.
What is Involved in Wheel Maintenance?
As the only point of contact with the ground, your skateboard’s wheels bear the brunt of wear and tear. Stay on top of their care.
- Rotate Wheels When Not In Use: Rotating wheels help distribute friction wear evenly across the set for longer life.
- Replace Damaged Bearings: Badly worn skateboard bearings lead to rough, noisy rides. Swap out damaged bearings right away to keep the wheels rolling smoothly.
- Regularly Check Wheel Thickness: Wheels can wear down quickly with regular use. It’s important to frequently check their thickness. As a rule of thumb, replace any wheels that reduce below 5mm in thickness.
With vigilant wheel checks and care, you’ll ride in comfort and confidence, knowing this vital component is in great shape.
What Are the Essential Cleaning Tools?
Having the right gear makes maintaining your e-skate easier. Building a maintenance toolkit allows you to keep your board in tip-top shape. Recommended handy tools include:
- Soft brush for dusting: The soft bristles help remove debris from the deck and hard-to-reach areas. Look for a compact brush that can fit in your backpack.
- Microfiber cloths for wiping down: Microfiber cloths lift away dirt without scratching surfaces. Keep a stash so you always have a clean one.
- T-handle tool for tightening bolts: A quality t-handle allows you to tighten wheel bolts and hardware to the proper specs.
- Lint-free cloths for drying: Absorbent, non-shedding cloths are ideal for drying parts after cleaning. Cotton towels can leave behind fibers.
- Skate tool for adjusting trucks: An adjustable skate tool lets you fine-tune your trucks for the perfect feel.
- Lubricating oil for bearings: Over time, bearings require a fresh lubricant to maintain their smooth operation. Always remember to clean out old lubricant before applying new, as this will help prevent the buildup of debris, which can cause harm to the bearings.
When choosing a lubricant, waterproof skate lube is typically the most effective option. However, apply sparingly – excessive oil can attract more dust and grit.
Investing in the proper maintenance equipment will pay off in the long run by keeping your ride rolling smoothly for years. With the right toolkit, upkeep becomes quick, easy, and even satisfying.
Conclusion
Keeping your electric skateboard humming doesn’t need to be a chore. By following these essential maintenance tips, you can optimize performance and enjoy endless miles of thrilling rides. A few minutes of TLC lets your skateboard’s true potential shine through. Now go relish the wind in your hair as you ride off into the sunset on a smoothly tuned machine!
Read More
- Ecomobl Mini Electric Skateboard Real Reviews – Ecomobl
- Off Road Electric Skateboards Vs Mountain Bikes – Ecomobl
- Off Road Electric Skateboarding Tips – Ecomobl
- Electric Skateboard Tips Rough Terrain – Ecomobl
- Top 5 Electric Mountain Boards Of 2023 – Ecomobl
